Overview of recall records associated with Invacare Corporation, including dates, categories and classifications where available.
Classification mix: Class II: 20, Class III: 1.
Invacare Homecare & G-Series Bed Components identified with a potential weld defect leads to premature weld failures to occur on these components
Premature failure of the seat during use, the plastic eyelets of the folding mechanism of the device's seat can break, and in a worst-case crossbar also breaks and the Rollator can collapse…
Between March 2, 2021 and December 31, 2021, the product label used in production did not contain the "Rx Only" statement as required.
The battery wiring harness on affected wheelchairs may become disconnected during shipment from the factory or during wheelchair use traversing large obstacles or after a jolt or impact to…
Power Wheelchairs with a LiNX Gyro component running firmware version 6.1.2 can experience a more aggressive deceleration rate than the programmed rate due to the system following the…
Power Wheelchairs with a LiNX Gyro component running firmware version 6.1.2 can experience a more aggressive deceleration rate than the programmed rate due to the system following the…
Power Wheelchairs with a LiNX Gyro component running firmware version 6.1.2 can experience a more aggressive deceleration rate than the programmed rate due to the system following the…
Breakdown of the sound abatement washer, and metal on metal wear inside the Pressure Equalization (P.E.) valve assembly in the concentrator may lead to failure that can result in…
Invacare has identified via customer complaints, the potential for the mounting bolt connecting the caster to the base frame of the patient lifts to become loose. Loose hardware can cause…
A typographical error was noted within the user manual for the 6632 Assist Bed Rail which could result in the Assist Bed Rails being installed incorrectly.
A quality issue with the junction box used in the bariatric bed junction that may omit sparks and result into a fire.
A quality issue with the junction box used in the bariatric bed junction that may omit sparks and result into a fire.
The junction box used in the bariatric bed may emit sparks and result in a fire.
A quality issue with the junction box used in the bariatric bed junction that may omit sparks and result into a fire.
The firm recently identified a quality issue with the Junction box used in the Invacare Bariatric Bed. They discovered that the Junction Box may omit sparks which could result in a fire in…
The firm recently identified a quality issue with the Junction box used in the Invacare Bariatric Bed. They discovered that the Junction Box may omit sparks which could result in a fire in…
The firm recently identified a quality issue with the Junction box used in the Invacare Bariatric Bed. They discovered that the Junction Box may omit sparks which could result in a fire in…
The rear gradation scale was screen printed upside down on the flowmeter gauge.
The rear gradation scale was screen printed upside down on the flowmeter gauge.
The firm recently identified a quality issue with the Junction box used in the Invacare Bariatric Bed. They discovered that the Junction Box may omit sparks which could result in a fire in…
The batteries used in the Invacare Pronto Air Personal Transporter models power wheelchairs have the possibility to overheat during charging which could potentially result in leaking…
This page summarizes recall records in which the official source identifies Invacare Corporation as the recalling firm or manufacturer. The number of records should not be treated as a safety rating or a measure of company size, because recall counts depend on product mix, reporting periods and how government records are organized.
Compare the dates, categories and classifications together rather than relying on the total alone. Open an individual record for the recalled product, reason, distribution details and current instructions available from the source.
