Complete FDA and NHTSA recall records dated in August 2021.
These records include useful source details for the selected month.
Subaru of America, Inc. (Subaru) is recalling certain 2021 Impreza vehicles. The left-front lower control arm weld may fail, allowing the control arm to separate from the crossmember.
Chrysler (FCA US, LLC) is recalling certain 2020 Jeep Wrangler vehicles equipped with the 2.0 Liter engine. A cracked fuel supply line connector may leak fuel into the engine compartment.
EVEXIA LUXE DVT PREVENTION DEVICE is marketed without FDA clearance
Two software issues have been identified related to pressure increase in the device: The first issue is described as "Infant/Pediatric EFS Calibration Pressure Increase" and the second…
Units are displaying output readings that differ from the measurements taken using a Gas Analyzer. When the display is reading a target setting of 5%, an external meter is reading between…
Mislabeled: Labeled on the package as 60mm contains 45mm devices
Problems related to the sterilization of the medical devices; possible missing sterility of the medical device
Problems related to the sterilization of the medical devices; possible missing sterility of the medical device
Potential for leaks and loosening at the patient catheter connection
Angioplasty system has a manufacturing issue that has the potential to result in difficulty deflating the outer balloon, which may result in increased risk of access site complications.
When setting patient weight unit preferences to pounds, SynchRight P3T (Personalized Patient Protocol) software will result in increased contrast volume, resulting in increased contrast…
Ultrasound system control panel arm swivel lock could fail, which could cause the control panel and monitor to swivel freely while a user is positioning the monitor, or transporting/moving…
The internal profile of the Triathlon Prim (Baseplate) is potentially oversized; there may be a witness mark (taper) at the bottom of the internal profile of the baseplate, which prevents…
Thermal injury following dusting and fragmenting treatment of ureteral stones when user exceeded the 20W standard presets
Problems related to the sterilization of the medical devices; possible missing sterility of the medical device
The firm received reports that the endotracheal tube cuff could be inflated while the pilot balloon remained flat.
Potential for stylet to protrude from the distal end of the catheter
The screw cover at the tip of the probe may fall off after a cleaning and sterilization process. Users advised to conduct a preventive inspection of the probe before and after…
Two software issues have been identified related to pressure increase in the device: The first issue is described as "Infant/Pediatric EFS Calibration Pressure Increase" and the second…
Vascular Grafts containing an inner diameter of 6 mm may be incorrectly labeled as 5 mm and Vascular Grafts containing an inner diameter of 5 mm are incorrectly labeled as 6 mm.
The firm received reports that the endotracheal tube cuff could be inflated while the pilot balloon remained flat.
Mouse Monoclonal Antibody labelled with an incorrect expiry date of 31 Dec 2023. The correct expiry date is 31 Dec 2022. If used beyond expiry, the material performance is likely to…
Potential patient exposure to the graphite substrate.
May show unexpected locus specific signals in addition to those at 19p13.3. Users may observe faint additional locus specific signals at 9q34
Use this page to compare the recalls reported during the month, then open an individual record for the exact reason, classification, company, remedy or distribution information available from the official source. Monthly counts are descriptive, not a safety rating.
